Original
By certification 
If you are looking for China golden supplier and China good supplier cold applied waterproof black woven polypropylene pipe wrap tape, good quality and high quality cold applied waterproof black woven polypropylene pipe wrap tape, please feel free to contact Jining Qiangke Pipe Anticorrosion Materials Co.,Ltd.
System Description
cold applied waterproof black woven polypropylene pipe wrap tape is designed for the corrosion protection of new and existing pipelines.Cold Applied Tape for pipeline coating is suitable to any diameters for petroleum, natural gas, water supply, city gas, oil and electric power industries etc. the systems are inner wrap tape and outer wrap tape, primer and Putty.anti corrosion adhesive tape can be used extensively in metal pipes of all pipelines and facilities in petroleum, natural gas, petrochemical industry, electric power, metallurgy, urban gas pipeline network and water supply etc. For efficient and long lasting outer anti corrosion.
Structures
|
Adhesive : high tack butyl rubber adhesive |
Interleaf: Anti-adhesive Film Treated with Silicone. |
Uses
Waterproofing-
-Waterproofing membrane for basements,sub structures and flat deck applications. plazas, bridge, vehicular traffic structures, or parking decks overlaid with an asphalt concrete wearing course.
-Tough, high performance waterproof membrane for critical substructures and civil engineering works.
-Provides a vapor and waterproof membrane to water excluding structures and protects concrete from attack by aggressive ground salts.
-Protection for wall ,floor, roof, corner, basement etc. to against from attack by bad weather, rain, acid alkaline salt
Pipelines protection
_ Weld joints
_ Bends
_ Fittings
_ Bare pipe lengths
_ Pipe rehab and repair
_Bare pipe length
_Line travel pipelines
Features
|
_ Flexibility provides extra protection at vulnerable areas _ Compatible with generic plant coatings _ Low cathodic protection requirements |
_ Can be applied over a wide temperature range _ Good conformability and consistent uniform thickness _ Heavy duty butyl adhesive ensures a strong bond & impervious seal. |
Technical Datas
|
UNIT |
TEST METHOD |
TYPICAL VALUES |
|||
POLYKENGTC 40 |
POLYKENGTC 50 |
POLYKENGTC 60 |
POLYKENGTC 65 |
|||
Total thickness |
mil |
ASTM D 1000 |
40mils(1.0mm) |
50mils(1.27mm) |
60mils(1.52mm) |
65mils(1.65mm) |
Tensile Strength |
Kg/cm |
ASTM D 1000 |
35 |
35 |
35 |
35 |
|
Peel adhesion To primed pipe |
|
ASTM D 1000 |
25 |
28 |
30 |
34 |
To backing |
Kg/cm |
ASTM D 1000 |
20 |
25 |
26.5 |
28 |
Dielectric Strength |
KV/mm |
ASTM D 1000 |
20 |
23 |
26 |
30 |
Water Absorptivity |
% |
ASTM D 570 |
0.1 |
0.08 |
0.08 |
0.06 |
Ordering Information
POLYKEN GTC
Eg.: POLYKEN GTC 4"×50'
|
Product Model No. |
Standard ordering options |
50 |
Total tape thickness in mils |
40mils(1.0mm),50mils(1.27mm),60mils(1.52mm),65mils(1.65mm) |
4 |
Tape width in inches |
2"(50mm),,4"(100mm),6"(150mm), |
50 |
Tape roll length in feet |
50ft(15M),100ft(30M) |
