- Manganese Brass
- 2019-09-25 17:39
- Manganese brass brazing alloy is applied to flame brazing, high frequency brazing, resistance brazing, and is used for brazing of hard alloys. The dirt such as grease, oxide on the surface of brazing metals should be well cleaned before brazing.The fluxes
- Copper Nickel Alloys
- 2019-07-09 07:19
- Copper Nickel Alloysis applied to the brazing of stainless steel,hard alloys such as tungsten, molybdenum, iron, kovar, nickel etc, applied widely in the industries of machinery, electromechanical, refrigeration, automobile and bicycle etc.
- Pure Copper Solder
- 2019-05-03 23:37
- Pure Copper brazer is applied to the brazing of stainless steel,hard alloys such as tungsten, molybdenum, iron, kovar, nickel etc, applied widely in the industries of machinery, electromechanical, refrigeration, automobile and bicycle etc.
- Pure Copper Paste
- 2017-12-09 03:05
- Pure copper brazing can be made into paste. It is suitable for narrow gap and automatic brazing of complex components, and easy to use. The roduct is suitable for brazing copper, bronze and steel, etc.
- Silicon Brass
- 2017-12-07 12:17
- Silicon brass brazing alloy is applied to flame brazing, high frequency brazing, resistance brazing, and is used for brazing of copper, copper alloys, steel, cast iron and hard alloys. The dirt such as grease, oxide on the surface of brazing metals should
- Sn-Cu Solder
- 2017-12-02 05:28
- Tin-lead solder owns many advantages including low melting point,excellent wettability and low cost ,so it was widely applied in the industry of electronic packaging ,for instance,the joint of electronic component leads and PCB pad.However as a toxic meta
- Silicon Bronze Brazing Alloy
- 2017-11-23 04:20
- Tin bronze brazing alloy is mainly used for brazing of copper, bronze and steel, etc. Must be strictly clearing grease, oxide and other dirt on the surface of the metal, before brazing. The fluxesare recommended to be used. The surface is bright and clean
- Silver-copper-nickel Brazing Alloys
- 2017-11-06 19:22
- silver-copper-nickel brazing alloys is a kind of silver-based solid solution. It has good properties such as high mechanical strength, good plasticity and electrical conductivity. It is applied to the brazing of ferrous metals and non-ferrous metals, such
- High Silver Brazing Alloy
- 2017-10-19 12:35
- High Silver brazing alloy owns good properties such as low melting point, excellent wettability and ability to fill the clearances, high mechanical strength, good plasticity, electrical conductivity and corrosion resistance.
- Sn-In Solder
- 2017-10-18 11:52
- Tin-lead solder owns many advantages including low melting point,excellent wettability and low cost ,so it was widely applied in the industry of electronic packaging ,for instance,the joint of electronic component leads and PCB pad.However as a toxic meta
- Flux Coating Silver Brazing Alloy
- 2017-10-16 17:54
- The silver brazing alloy can be made into flux coating brazing alloy. Flux coating silver brazing alloy is applicable to automatic brazing. It need not coating flux, can has higher production efficiency, saves the material consumption.
- Silver-aluminium Alloys
- 2017-10-03 09:23
- Aluminum alloy solders are applied for joinning aluminum to aluminum alloys. It is not suitable for joinning other metals as the oxide on the surface of aluminum solder is difficult to be removed, furthermore the brittle intermetallic compounds formed by
- Medium-silver Copper Phosphorus Brazing Alloy
- 2017-09-22 15:04
- The product is used for brazing of copper ,copper alloys and other alloys. It has lower melting point,more excellent fluidity, better brazing properties than the low-silver copper phosphorus brazing alloy. The brazing joint has high mechanical strength an
- Tin Bearing Silver Phoscopper Brazing Alloy
- 2017-09-20 23:20
- tin bearing silver phoscopper brazing alloy The product is used for brazing of copper and copper alloys. It has a lower melting point, excellent fluidity, good brazing properties. The brazing joint has high mechanical strength and smooth surface. Flux is
- Flux-cored Aluminium Brazing Alloy
- 2017-09-09 11:26
- The Aluminium brazing alloy can be made into flux cored brazing alloy. Flux cored Aluminium brazing alloy is applicable to automatic brazing. It need not coating flux, can has higher production efficiency, saves the material consumption.
- Tin Bronze Brazing Alloy
- 2017-09-07 16:20
- Tin bronze brazing alloy is mainly used for brazing of copper, bronze and steel, etc. Must be strictly clearing grease, oxide and other dirt on the surface of the metal, before brazing. The fluxesare recommended to be used.
- Phoscopper Brazing Alloy
- 2017-09-05 18:50
- Copper phoscopper brazing alloy are principle elements of the product, it owns good fluidity and is applied in the resistance brazing, flame brazing and high frequency brazing. It is used in brazing of copper and copper alloys, but not in brazing of ferro
- Manganese Bronze Brazing Alloy
- 2017-08-22 14:29
- Manganese bronze brazing alloy is mainly used for brazing of copper, bronze and steel, etc. Must be strictly clearing grease, oxide and other dirt on the surface of the metal, before brazing. The fluxesare recommended to be used.The wettability of brazer
- Silver-copper-tin Brazing Alloys
- 2017-08-06 21:40
- Silver-copper-tin brazing alloys is a kind of silver-based solid solution. It has goodproperties such as excellent wettability and ability to fill the clearances, good plasticity and electrical conductivity.
- Silver Power
- 2017-07-16 02:03
- The silver brazing alloy can be made intopowder, It is suitable for the brazing of narrow gap and complex components. It can save the dosage。